IP-COM AP W63 Basic Configuration

In this article we will see how to Configure IP-COM AP W63 Access Point.

Default IP Address:- 192.168.0.254

Login Credentials
Username:- admin
Password:- admin

Step 1: Login to Access Point
Step 2: Configure Wireless SSID
Step 3: Configure Wireless Radio Step 4: Configure LAN IP Address

Lets Start…

Step 1: Login to Access Point

✦ Assign IP Address 192.168.0.200 on Laptop and Access the Access Point GUI using Default IP Address: 192.168.0.254

Step 2: Configure Wireless SSID

✦ Click on Wireless -> SSID -> Click on 2.4Ghz Tab -> Status: Tick Mark Enable -> Broadcast SSID: Tick Mark Enable-> SSID: Enter SSID Name -> Security Mode: Select None from Drop Down List and click on Save Button.

✦ Click on Wireless -> SSID -> Click on 5Ghz Tab -> Status: Tick Mark Enable -> Broadcast SSID: Tick Mark Enable-> SSID: Enter SSID Name -> Security Mode: Select None from Drop Down List and click on Save Button.

Step 3: Configure Wireless Radio

✦ Click on Wireless -> RF Settings -> Click on 2.4Ghz Tab -> Wireless Network: Tick Mark Enable -> Country/Region: Select India from drop Down list -> Network Mode: Select 11b/g/n from drop Down list -> Channel: Select CH as per the requirement and click on Save Button

✦ Click on Wireless -> RF Settings -> Click on 5Ghz Tab -> Wireless Network: Tick Mark Enable -> Country/Region: Select India from drop Down list -> Network Mode: Select 11ac from drop Down list -> Channel: Select CH as per the requirement and click on Save Button

Step 4: Configure LAN IP Address

✦ Click on Internet Settings -> LAN Setup -> IP Address Type: Select Static from Drop Down list -> IP Address: 192.168.160.10 -> Subnet Mask: 255.255.252.0 -> Default Gateway: 192.168.160.1 -> Primary DNS: 8.8.8.8 and click on Save Button.

✦ Note:- Make sure the DHCP Server is turned Off (Click on Internet Settings -> DHCP Server -> DHCP Server: Should be Disabled)