Aruba 5406Rzl2 Core Switch VLAN Configuration

by

In this article we will see how to Create VLAN on Aruba 5406Rzl2 Core Switch.

VLAN Details:
VLAN 100 – AP MGMT
VLAN 1000 – WIFI VLAN

Default Login Credentials
Username: admin
Password: (Blank)

Lets Start the Configurations…

Login to CLI -> When Prompted Enter Username admin -> When prompted for the password Enter New Password Need to Set eg. admin and Press ENTER (By default, no password is defined.) -> When asked to Re-enter the Password just enter same password again eg. admin and Press ENTER. You will be logged in to Switch.

CMD to Create VLAN
HP-Switch-5406Rzl2> enable
Username: admin
Password: admin
HP-Switch-5406Rzl2#
HP-Switch-5406Rzl2# configure terminal
HP-Switch-5406Rzl2(config)# 
HP-Switch-5406Rzl2(config)# vlan 100
HP-Switch-5406Rzl2(vlan-100)# name MGMT_VLAN
HP-Switch-5406Rzl2(vlan-100)#
HP-Switch-5406Rzl2(vlan-100)# exit
HP-Switch-5406Rzl2(config)# vlan 1000
HP-Switch-5406Rzl2(vlan-1000)# name GUEST_VLAN
HP-Switch-5406Rzl2(vlan-1000)# exit
HP-Switch-5406Rzl2(config)# 
HP-Switch-5406Rzl2(config)# vlan 100
HP-Switch-5406Rzl2(vlan-100)# untagged A1-A12
HP-Switch-5406Rzl2(vlan-100)# exit
HP-Switch-5406Rzl2(config)# 
HP-Switch-5406Rzl2(config)# vlan 1000
HP-Switch-5406Rzl2(vlan-1000)# tagged A1-A12
HP-Switch-5406Rzl2(vlan-1000)# exit
HP-Switch-5406Rzl2(config)#
CMD to Save the Configuration
 
HP-Switch-5406Rzl2(config)# save

OR

HP-Switch-5406Rzl2(config)# write memory
CMD to Check the Switch Configuration
 
HP-Switch-5406Rzl2# show running-config

Leave a Comment