In this article we will see how to Create VLAN on Aruba 2930F Switch.
VLAN Details:
VLAN 100 – AP MGMT
VLAN 1000 – WIFI VLAN
Default Login Credentials
Username: admin
Password: (Blank)
Lets Start the Configurations…
Login to CLI -> When Prompted Enter Username admin -> When prompted for the password Enter New Password Need to Set eg. admin and Press ENTER (By default, no password is defined.) -> When asked to Re-enter the Password just enter same password again eg. admin and Press ENTER.
You will be logged in to Switch.
CMD to Create VLAN
Aruba-2930F-24G-PoEP-4SFPP> enable Username: admin Password: admin Aruba-2930F-24G-PoEP-4SFPP# Aruba-2930F-24G-PoEP-4SFPP# configure terminal Aruba-2930F-24G-PoEP-4SFPP(config)# Aruba-2930F-24G-PoEP-4SFPP(config)# vlan 100 Aruba-2930F-24G-PoEP-4SFPP(vlan-100)# name MGMT_VLAN Aruba-2930F-24G-PoEP-4SFPP(vlan-100)# Aruba-2930F-24G-PoEP-4SFPP(vlan-100)# exit Aruba-2930F-24G-PoEP-4SFPP(config)# vlan 1000 Aruba-2930F-24G-PoEP-4SFPP(vlan-1000)# name GUEST_VLAN Aruba-2930F-24G-PoEP-4SFPP(vlan-1000)# exit Aruba-2930F-24G-PoEP-4SFPP(config)# Aruba-2930F-24G-PoEP-4SFPP(config)# vlan 100 Aruba-2930F-24G-PoEP-4SFPP(vlan-100)# untagged 1-28 Aruba-2930F-24G-PoEP-4SFPP(vlan-100)# exit Aruba-2930F-24G-PoEP-4SFPP(config)# Aruba-2930F-24G-PoEP-4SFPP(config)# vlan 1000 Aruba-2930F-24G-PoEP-4SFPP(vlan-1000)# tagged 1-28 Aruba-2930F-24G-PoEP-4SFPP(vlan-1000)# exit Aruba-2930F-24G-PoEP-4SFPP(config)#
CMD to Save the Configuration
Aruba-2930F-24G-PoEP-4SFPP(config)# save OR Aruba-2930F-24G-PoEP-4SFPP(config)# write memory
CMD to Check the Switch Configuration
Aruba-2930F-24G-PoEP-4SFPP# show running-config