IP-COM AC2000 Access Controller Configuration – Managed Solution

Connect Laptop on LAN2 Port and you will get DHCP IP Address from Controller.

Default IP Address
LAN1 – LAN5:- 192.168.10.1

Username:- admin
Password:- admin

Change Date & Time:-
Login to Controller -> Click on System Tools -> Date&Time

System Time Click on Synchronize with PC Time
Time Zone Select Time Zone from Drop Down Menu
NTP Network Time Tick Mark Enable
Sync Interval 30minutes
Expired Time 5Minutrs
and Click on OK.

IP Address Configuration
Login to Controller -> Click on System Tools -> Network Setting

LAN Settings
IP Address 192.168.160.1
Subnet Mask 255.255.252.0
and Click on OK.

DHCP Setting (For Access Point)
Login to Controller -> Click on System Tools -> Network

DHCP Setting
Start IP 192.168.160.100
End IP 192.168.163.254
Gateway Keep Blank
Preferred DNS Keep Blank
Alternate DNS Keep Blank
Lease Time Select 1 Week from Drop Down Menu
and Click on OK.

SSID Creation (For Access Point)
Login to Controller -> Manage Policy -> SSID Policy -> Click on Add Button

SSID Policy
Policy Enter Policy Name like Guest VLAN
SSID Enter SSID Name
Security Select Disable from Drop Down List
Client Limit for SSID Type 64
Client Isolation Tick mark if need to enable
SSID Hidden Tick mark if need to enable
VLAN ID Enter VLAN ID like 1000
and Click on OK.

Radio Profile Creation (For Access Point)
Login to Controller -> Manage Policy -> Radio Policy -> Click on Add Button

Radio Policy
Policy Enter Policy Name
2.4G 5G
WiFi Tick mark Enable
Airtime Scheduling Default OFF
Country India
Network Mode Select 11 b/g/n from drop down Menu
Bandwidth Tick mark 20
Channels Select Auto from Drop Down Menu
TX Power Keep Default 23dBm
RSSI Threshold Keep Default -80
WMM Tick Mark Enable
SSID Isolation Tick Mark Enable if Required
APSD Tick Mark Enable if Required
Time Age for Client Select 10 mins from drop down menu
Now Scrol UP and select 5G
WiFi Tick mark Enable
Airtime Scheduling Default OFF
Country India
Network Mode Select 11 ac from drop down Menu
Bandwidth Tick mark 80
Channels Select Auto from Drop Down Menu
TX Power Keep Default 21dBm
RSSI Threshold Keep Default -90
WMM Tick Mark Enable
SSID Isolation Tick Mark Enable if Required
APSD Tick Mark Enable if Required
Time Age for Client Select 10 mins from drop down menu
5G Priority Tick Mark Enable
and Click on Save Button.

VLAN Policy (For Access Point)
Login to Controller -> Manage Policy -> VLAN Policy -> Click on Add Button

VLAN Policy
Policy Enter Policy Name like VLAN
AP VLAN Enable if Client SSID Having VLAN
PVID Keep Default 1
Manage Vlan Enter AP Management VLLAN Like 100
Trunk Mode Tick Mark LAN0 and LAN1 as per requirement
Access Mode VLAN ID (1-4094)
LAN 0 Keep Default
LAN 1 Keep Default
and Click on OK.

VLAN Settings
Login to Controller -> System Tools -> Network Setting

VLAN Settings
Caution: The device supports up to 48 VLANs. You need to reboot the device to activate the settings after settings modified.
VLAN ID Enter Management VLAN ID i.e 100
LAN Port Tick Mark the Controller Port in our Senerio its LAN 1
and Click on Add Button.

Leave a Comment