Connect Laptop on LAN2 Port and you will get DHCP IP Address from Controller.
Default IP Address
LAN1 – LAN5:- 192.168.10.1
Username:- admin
Password:- admin
Change Date & Time:-
Login to Controller -> Click on System Tools -> Date&Time
| System Time |
Click on Synchronize with PC Time |
| Time Zone |
Select Time Zone from Drop Down Menu |
| NTP Network Time |
Tick Mark Enable |
| Sync Interval |
30minutes |
| Expired Time |
5Minutrs |
and Click on OK.
IP Address Configuration
Login to Controller -> Click on System Tools -> Network Setting
| LAN Settings |
| IP Address |
192.168.160.1 |
| Subnet Mask |
255.255.252.0 |
and Click on OK.
Note:- Once Change the IP Address We need to Manually Assign the IP Address on Laptop LAN Port like 192.168.160.5/255.255.252.0 so that we are in Same Subnet.
DHCP Setting (For Access Point)
Login to Controller -> Click on System Tools -> Network
| DHCP Setting |
| Start IP |
192.168.160.100 |
| End IP |
192.168.163.254 |
| Gateway |
Keep Blank |
| Preferred DNS |
Keep Blank |
| Alternate DNS |
Keep Blank |
| Lease Time |
Select 1 Week from Drop Down Menu |
and Click on OK.
SSID Creation (For Access Point)
Login to Controller -> Manage Policy -> SSID Policy -> Click on Add Button
| SSID Policy |
| Policy |
Enter Policy Name like Guest VLAN |
| SSID |
Enter SSID Name |
| Security |
Select Disable from Drop Down List |
| Client Limit for SSID |
Type 64 |
| Client Isolation |
Tick mark if need to enable |
| SSID Hidden |
Tick mark if need to enable |
| VLAN ID |
Enter VLAN ID like 1000 |
and Click on OK.
Radio Profile Creation (For Access Point)
Login to Controller -> Manage Policy -> Radio Policy -> Click on Add Button
| Radio Policy |
| Policy |
Enter Policy Name |
| 2.4G |
5G |
| WiFi |
Tick mark Enable |
| Airtime Scheduling |
Default OFF |
| Country |
India |
| Network Mode |
Select 11 b/g/n from drop down Menu |
| Bandwidth |
Tick mark 20 |
| Channels |
Select Auto from Drop Down Menu |
| TX Power |
Keep Default 23dBm |
| RSSI Threshold |
Keep Default -80 |
| WMM |
Tick Mark Enable |
| SSID Isolation |
Tick Mark Enable if Required |
| APSD |
Tick Mark Enable if Required |
| Time Age for Client |
Select 10 mins from drop down menu |
Now Scrol UP and select 5G
| WiFi |
Tick mark Enable |
| Airtime Scheduling |
Default OFF |
| Country |
India |
| Network Mode |
Select 11 ac from drop down Menu |
| Bandwidth |
Tick mark 80 |
| Channels |
Select Auto from Drop Down Menu |
| TX Power |
Keep Default 21dBm |
| RSSI Threshold |
Keep Default -90 |
| WMM |
Tick Mark Enable |
| SSID Isolation |
Tick Mark Enable if Required |
| APSD |
Tick Mark Enable if Required |
| Time Age for Client |
Select 10 mins from drop down menu |
| 5G Priority |
Tick Mark Enable |
and Click on Save Button.
