How to Access HPE 1920 Switches Via Console

To configure and manage the switch, you must run a console terminal like Putty.

The following are the required terminal settings:
• Bits per second—38400
• Data bits—8
• Parity—None
• Stop bits—1
• Flow control—None

Default Login Details
Username:- admin

By Default HPE 1920 Switch provide only basic cmd line and Configuration can be done using GUI but there is an option to enable the Advance CLI so that Switch can be configured via CLI, you can Follow my previous Blog “How to Enable Advance CLI on HPE 1920 Switches” to Enable Advance CLI.

Leave a Comment