Aruba 5406Rzl2 VSF Configuration

by

In this article we will see how to Configure VSF on Aruba 5406Rzl2 Core Switch.

HP-Switch-5406Rzl2> enable
Username: admin
Password: admin
HP-Switch-5406Rzl2#
HP-Switch-5406Rzl2# configure terminal
HP-Switch-5406Rzl2(config)# vsf enable domain 1
This will save the current configuration and reboot the switch.
Continue (y/n)? y
Once the switch reboots into VSF mode and assumes the Commander role, configure one or more ports as the initial VSF link: 
HP-Switch-5406Rzl2> enable
Username: admin
Password: admin
HP-Switch-5406Rzl2#
HP-Switch-5406Rzl2# configure terminal
HP-Switch-5406Rzl2(config)# vsf member 1 link 1 1/49,1/50
Connect the VSF link cable(s) to the second member and power it on. Once the switch brings up ports and detects the active VSF link, it will reboot and join the fabric automatically.

To set priority for VSF members, use the following commands (replace listed values as appropriate): 
HP-Switch-5406Rzl2> enable
Username: admin
Password: admin
HP-Switch-5406Rzl2#
HP-Switch-5406Rzl2# configure terminal
HP-Switch-5406Rzl2(config)# vsf member 1 priority 255
HP-Switch-5406Rzl2(config)# vsf member 2 priority 192

Leave a Comment